⎝⎛im体育娱乐⎞⎠

欢迎光临无锡广和盛化工设备有限公司官方网站! Message | Contact Us | Favorite Welcome to the official website of Wuxi Guanghesheng Chemical Equipment Co., Ltd.!

Discuss the cause of thermal deformation of the autoclave

Release date: 2019-09-19 04:37:31 Visits: 450

Xiaoyi introduces the cause of the thermal deformation of the high pressure reactor

  1. According to the product performance of the high pressure reactor , the reactor equipment can withstand high temperatures. Basically, there is no such thing as deformation, but it is impossible to rule out some special cases.

2. When the high-pressure reactor equipment is used in actual use, when the water quality fails or the water slag is too much, it usually causes the reactor to deform.

3. When designing a high-pressure reactor, the layout of the mixer was poor. At this time, the device may not be able to withstand heat and deform for a long time in actual operation.

Generally, in the operation of an autoclave , the heating surface needs to be cooled with water from time to time. However, when problems occur or cooling is stopped, the device may overheat and deform.

English:

iaoyi will introduce the cause of thermal deformation of high-pressure reactor for you.


1. According to the product performance of the autoclave, the reactor equipment can withstand high temperature. Basically, there is no such thing as deformation, but it is impossible to rule out some special cases.


2. When the high-pressure reactor equipment is used in the actual process, when the water quality fails or excessive water slag, the reactor will usually be deformed.


3. In the design of high-pressure reactor, the mixer layout is very poor. At this point, the device may not be able to withstand heat and deformation for a long time in actual operation.


Usually, in the operation of high-pressure reactor, the heating surface needs to be cooled by water from time to time. However, when problems arise or cooling stops, the equipment may overheat and deform.

contact us
Service Hotline

0510-85605893

0510-85600555 Fax 0510-85600555

xngl@xngl.com Enterprise email xngl@xngl.com

无锡惠山经济开发区堰新东路9号 Address No. 9 Yanxin East Road, Huishan Economic Development Zone, Wuxi

七乐彩 欢乐拼三张 必赢真人娱乐 欢乐拼三张