⎝⎛im体育娱乐⎞⎠

欢迎光临无锡广和盛化工设备有限公司官方网站! Message | Contact Us | Favorite Welcome to the official website of Wuxi Guanghesheng Chemical Equipment Co., Ltd.!

Air tightness test of stainless steel reactor

Release date: 2019-09-19 04:41:07 Visits: 383

Xiaoyi introduces the air tightness test of stainless steel reactor.

In the process of the stainless steel reactor , the overflow protection device effectively includes the cylinder to a certain extent, and during the setting process, the liquid discharge port is mainly located on the lower side of the cylinder, and during the design process, the The butt joint at the center position, the air outlet hole formed at the upper end surface of the cylinder body, and the lower port of the cylindrical floating body butt pipe directly below the butt pipe for blocking the elastic gasket.


The static ring end surface of the stainless steel reactor can have a vertical tolerance of 0.05 mm to a certain extent. During operation, the equipment can be used for hydraulic testing, and the leakage at the seal must not exceed 10ml / h. Springs are not allowed to have defects such as rust and deformation, and the total contact area is greater than 80%. The surface of the moving ring and static ring of the stainless steel reactor mechanical seal must not have scratches, bumps or scratches, and the flatness of the contact surface should meet the requirements.


The stainless steel reaction kettle is used as a gas tightness test to a certain extent. In the rotating state, the mechanically sealed oil pan should not produce continuous small air bubbles. Visually inspect the packing gland packing end or single end. Whether there is oil in the oil cup of the machine seal, whether the oil in the lubrication system of the double-end mechanical seal is sufficient, whether the oil in the reducer reaches 1/3 of the oil window, and whether there is oil leakage from each lubrication system.


During the operation of the stainless steel reactor , effectively check whether the valves, fittings, insulation layers and pipes on each connecting pipe are intact, whether the manual valve operation is effective during operation, whether the handwheel is intact, whether the valve is closed, whether the valve is smoothly opened and Closed, if the safety valve is closed, and if the required utilities are ready.

English:

Xiaoyi will introduce the gas tightness test of stainless steel reactor for you.


In the process of stainless steel reactor, the overflow protection device effectively includes the cylinder to a certain extent, and in the setting process, the liquid outlet is mainly located at the lower side of the cylinder, and in the design process, the butt joint at the central position of the upper end face of the cylinder block, and the air outlet formed at the upper end surface of the cylinder block. The holes and the lower ports of the cylindrical floating butt pipe directly below the butt pipe for blocking the elastic washer.


The static ring end face of stainless steel reactor can have a vertical tolerance of 0.05 mm to a certain extent. During operation, the equipment can be used for hydraulic test, and the leakage at the seal can not exceed 10 ml / h. Spring is not allowed to have rust and deformation defects, the total contact area is more than 80%. There shall be no scratches, concave convex or scratches on the surfaces of the moving and static rings of the mechanical seals of stainless steel reactors, and the smoothness of the contact surface shall meet the requirements.


Stainless steel reactor is used for air tightness test to a certain extent. In the rotating state, the oil pan of mechanical seal should not produce continuous small bubbles. Visually check whether the packing gland of packing seal is at the end or at the single end . Whether there is oil in the oil cup sealed by the machine, whether there is enough oil in the lubrication system of the double-ended mechanical seal, whether the oil in the reducer reaches 1/3 of the oil window, whether there is oil leakage in each lubrication system.


During the operation of stainless steel reactor, check the valves, fittings, insulating layer and pipelines on the connecting pipes effectively, whether the manual valve is in good condition during operation, whether the valves are closed, whether the valves are opened and closed smoothly, whether the safety valves are closed or not, and the required facts. Is the program ready?

contact us
Service Hotline

0510-85605893

0510-85600555 Fax 0510-85600555

xngl@xngl.com Enterprise email xngl@xngl.com

无锡惠山经济开发区堰新东路9号 Address No. 9 Yanxin East Road, Huishan Economic Development Zone, Wuxi

七乐彩 欢乐拼三张 必赢真人娱乐 欢乐拼三张